Outdoor
Cattle Panel Removal in Brunswick, GA
Yes — the rusty cattle panels along the back fence line, the old hog-wire pen, the garden arch that’s leaning, the stack of corral gates nobody needs anymore. Give us a call and you’ll have the price before anything comes down.
- Upfront pricing, always
- Locally owned & operated
- Insured

Who Hauls Away Old Cattle Panels and Livestock Fencing in Brunswick?
Same-Day Cattle Panel Removal in Brunswick Often Available — Give Us a Call
Pricing
How pricing works.
What cattle panel removal costs here. We price by the tier your items fill, starting at $95–$150 for a 1/8 truck; a quick call is usually enough to estimate the tier, and photos help if you have them. The final price is confirmed in writing on site before anything is loaded, and it includes carry-out, the disposal fee and cleanup.
Flat panels stack tight, so a handful of them take a small share of the truck. A long run still standing on its posts, a full corral or panels buried in vines take more time and more hands. The minimum for any pickup is $95.
The short version
Cattle Panel Removal at a glance.
- What it is
- Haul-away of welded-wire livestock panels and the things built from them — pens, corrals, dog runs, trellises and arches — with their T-posts and ties.
- What’s included
- Cattle, hog, goat and corral panels
- Panel trellises, arches and garden tunnels
- T-posts pulled, ties and clips gathered
- Steel recycled whenever possible
- Wire bits raked up before we leave
- How pricing works
- Priced by how many panels and posts there are, whether they’re standing, and the carry. Count the panels and posts for us over the phone and we’ll size it up; the firm number for the fence line is written up on site before a panel is pulled.
Also called: livestock panels, hog panels, goat panels, corral panels, round pen panels, welded wire panels, cattle panel trellis.
Part of our Light Demolition service
Yes, we take cattle panels. They’re the most useful thing on a rural property until they aren’t. People buy them for a pen, then turn them into a garden arch, a tomato trellis, a dog run, a chicken yard — and after enough wet summers the galvanizing gives up, the bottom wires rust through, and the vines have grown into every square.
A sixteen-foot panel isn’t heavy so much as unwieldy. It flexes, it springs back, and the cut wire ends at the edges will catch a sleeve or a leg. So panels get handled with gloves, two people to a panel, carried flat and stacked tight on the truck rather than dragged across the yard. A curved arch panel gets flattened or cut down to something that rides.
What holds them up comes too: the T-posts, the wire ties and hog rings, the clips and the gate hinges.
What we haul
Specifically, what we take for cattle panel removal.
- Cattle, hog, goat and combination panels
- Corral panels, round-pen panels and livestock gates
- Panel trellises, garden arches and tunnels
- Dog runs and chicken yards built from panels
- T-posts, wire ties, hog rings and clips
- Rolls of old field fence and woven wire
How we work
Taking Down Old Cattle Panels on Brunswick-Area Acreage
Whether the panels are already stacked by the barn or still standing on their posts with a summer of vines grown through them, that’s something we can look at. Give us a call at (912) 222-1677, tell us roughly how many and where they sit, and we’ll walk through what it takes to clear them out. You get the price up front, and we call ahead when we’re on the way.
Out on acreage, the plan starts with where the truck can sit without rutting the yard after a wet week, and how far the panels have to be carried. If anything special is needed, we’ll sort it out with you when we quote.
Panels and posts are steel, so they’re recycled with the metal whenever possible. Vines, ties and rotted wood go as disposal. The fence line or garden bed is raked clean of wire bits before we go.
Cattle panels around Brunswick mostly live on the bigger rural lots — out in Thalman, where a few acres might still have an old pen or a run of panels along the back fence, and along Highway 99, where people reuse them for garden arches, goat yards and dog runs. The questions are usually the same: how close the truck can get across the grass after a rain, and how many posts are still in the ground. Phone us with a rough count of panels, and we’ll estimate it for any property around Brunswick.
- Weight, each
- 40–60 lb
- Space, each
- about 10 cu ft
About 2% of the truck, which usually lands in the 1/8 truck tier ($95–$150).
- Single-item pickup
- $95+ minimum; one usually fills the 1/8 truck tier ($95–$150)
- Added to a bigger load
- +$30–$45 est.
Good to know
- Clear a path to it if that’s easy — the lifting is our job.
Typical figures, not a quote. Call for a free estimate; your firm, final price is confirmed in writing on site before anything is loaded. The minimum for any pickup is $95.
FREE ESTIMATES · LOCAL TEAM
Need cattle panel removal in Brunswick or the Golden Isles? Give us a call.
You don’t have to have everything figured out before calling. Tell us what needs to go and we’ll talk through the details and pricing with you.
Questions
Frequently asked questions about cattle panel removal.
Can you haul old cattle panels off a property outside Brunswick?
Our Brunswick garden has a cattle panel arch overgrown with vines. Can that go?
Do you pull the T-posts too?
Does the metal get recycled?
Related items
Other things people pair with this haul.
Fence Removal
Fence removal varies by material and post setup.
Read moreFarm Equipment Removal
What sets the job is where each piece sits and what the ground is like between it and the truck.
Read moreChicken Coop Removal
Most coops come down in pieces rather than all at once.
Read moreDog Kennel Removal
Most panel kennels come apart faster than people expect.
Read moreScrap Metal Removal
Scrap loading is the routine work — gloves on, gloves stay on.
Read moreDeer Stand Removal
Call and tell us about the stand and the way in — the lane, the gate, how wet the ground gets — and we plan the trip around it.
Read more
Common in
Where we haul cattle panel removal most.
We haul cattle panel removal regularly across the Golden Isles, especially around Brunswick, Darien, Woodbine, St. Simons Island, and Jekyll Island.
More in Farm & Barn Equipment Removal
Cattle Panel Removal by town: Darien
Serving Brunswick, the Golden Isles and Coastal Georgia.
From our Brunswick base, we handle cattle panel removal across all five counties we serve: Glynn, McIntosh, Camden, Liberty and Wayne. Same-day pickup is often available around Brunswick and the islands. Call (912) 222-1677 for the next available opening.
FREE ESTIMATES · LOCAL CREW
Tell us what needs to go—we’ll handle the heavy lifting.
Whether it’s one heavy piece upstairs, a garage you can’t park in, or an entire property cleanout, our crew removes it right from where it sits. Call for a free, no-obligation estimate across Brunswick, the Golden Isles, and Coastal Georgia.
- Speak with our local team
- Upfront pricing before we lift a thing
- Open Mon–Sat 7:30am–10pm
- Sunday 9am–7pm
