Can You Haul an Old Tanning Bed Out of a Brunswick Home?
Same-Day Tanning Bed Removal in Brunswick Often Available — Call or Text
Pricing
How pricing works.
What tanning bed removal costs here. We price by the tier your items fill, starting at $95–$150 for a 1/8 truck; a single item is quoted from a photo so we can confirm the tier before anything is loaded. The number you agree to is the number you pay, and it includes carry-out, the disposal fee and cleanup.
One home bed in a garage is about as simple as this gets. A commercial bed up a flight of stairs takes more hands, and a salon with several beds and booths is priced as one load rather than bed by bed. Add something on the day and we’ll tell you the difference before we load it. The minimum for any pickup is $95.
The short version
Tanning Bed Removal at a glance.
- What it is
- Removal of home and salon tanning beds and stand-up booths — split at the hinge or taken apart in sections, carried out carefully and hauled away.
- What’s included
- Home and commercial lay-down beds
- Stand-up tanning booths
- Canopy and base separated for the carry
- Walls and door frames padded on tight turns
- Several beds from a salon priced as one load
- How pricing works
- Priced by the tier the beds fill, with stairs and the number of units setting most of it. Firm price from a photo, confirmed before anything is loaded.
Also called: tanning bed, tanning booth, stand-up tanning booth, home tanning bed, salon tanning bed, sunbed.
Part of our Single Item Pickup service
Yes, we take tanning beds. A lay-down tanning bed is really two big pieces: the base you lie on and the canopy that closes over you, joined by a hinge or a pair of lift arms. Together they’re long, wide and heavier than they look. Apart, each half is something two people can carry through a normal doorway.
So the job almost always starts by splitting it. The canopy comes off the base at the hinge, the acrylic sheets get protected or come out so they don’t crack against a door frame, and the two halves go out one at a time. A stand-up booth comes apart the other way — side panels, door and top — and goes out as a stack of flat sections.
Home beds usually show up in a garage, a spare room or a back porch. Salon beds come in rows, and a salon that’s closing or swapping equipment may have several beds, a booth or two, and the front-desk furniture all going at once.
What we haul
Specifically, what we take for tanning bed removal.
- Home lay-down tanning beds
- Commercial salon tanning beds
- Stand-up tanning booths
- Tanning bed canopies and bases, together or separated
- Salon suites with several beds, booths and furniture
- Tanning beds that came with a house you bought
How we work
Tanning Bed Pickup at Brunswick Homes and Salons
The crew looks at the hinge first, because that decides how the bed comes apart. Most canopies separate with ordinary tools. The heavier half is usually the base, and it goes out on a dolly with the hallway walls and door frames padded where the corners are tight. Nobody drags it across a floor.
Plenty of home beds plug into an outlet, and plenty of salon beds are wired in on their own circuit. When licensed electrical or plumbing work is needed, that’s normally handled by you or a licensed pro. Show us what you have and where it is, and we’ll help figure out what’s needed and work around it. If something about the bed itself is unusual, send us a few photos and tell us where it is, and we’ll tell you what it takes.
The steel frame usually goes to scrap recycling, often at SA Recycling in Brunswick. A bed that still works can be offered to a donation organization we work with — they decide what they’ll accept, and condition matters. Everything else leaves with the load.
A tanning bed in Brunswick might be sitting in a salon suite along the Altama Avenue corridor, or in the garage of one of the newer homes around Harry Driggers Boulevard. The salon version brings a few questions a house doesn’t: where the truck can park without blocking anyone, whether there’s a back door, and what hours suit the business. The house version is simpler — split the canopy from the base right there in the garage and carry two halves to the truck. Either way, a photo and the address are enough for a firm price, whether it’s one bed or a whole salon across Brunswick.
Ready when you are
Need tanning bed removal hauled away? We can help.
Questions
Frequently asked questions about tanning bed removal.
Related items
Other things people pair with this haul.
Adjustable Bed & Base Removal
We unplug the base, coil the cord and lower it flat if it still moves.
Read moreExercise Equipment Removal
Most home gyms come apart with hex keys and patience.
Read moreOffice Furniture Removal
Office furniture removal is volume work.
Read moreHospital Bed Removal
Send us a photo of the bed and the room it’s in.
Read moreMobility Scooter Removal
On the day, the seat usually lifts off and the battery pack comes out, so the frame and the battery go out as separate, lighter pieces.
Read morePatient Lift Removal
Send a photo of the lift and the room it’s in, and tell us whether there are stairs between it and the door.
Read more
Common in
Where we haul tanning bed removal most.
We haul tanning bed removal regularly across the Golden Isles, especially in Brunswick, St. Simons Island, Kingsland, Jekyll Island, and Sea Island.
More in Hot Tub, Pool & Sauna Removal
Serving Brunswick and St. Simons Island.
Tanning Bed Removal is handled out of our Brunswick base, across Glynn County and the Golden Isles. Same-day pickup is often available — call or text for the next available opening.
Ready when you are
Ready to get it out of your driveway?
Get a firm price from photos. Same-day pickup often available across the Golden Isles.
Get a free estimate onlineOpen Mon–Sat 7:30am–10pm · Sunday 9am–7pm
Last reviewed: October 18, 2026