Outdoor
Pool Screen Enclosure Removal in Brunswick, GA
Yes — the pool cage with torn screens, the storm-bent frame, the enclosure you’re finally replacing. We take the screens and the aluminum down piece by piece, keep everything out of the water and haul it all away.
- Upfront pricing, always
- Locally owned & operated
- Insured

Who Takes Down an Old Pool Screen Enclosure in Brunswick?
Same-Day Pool Screen Enclosure Removal in Brunswick Often Available — Give Us a Call
Pricing
How pricing works.
What pool screen enclosure removal costs here. We price by the tier your items fill, starting at $95–$150 for a 1/8 truck; a quick call is usually enough to estimate the tier, and photos help if you have them. The final price is confirmed in writing on site before anything is loaded, and it includes carry-out, the disposal fee and cleanup.
A small screened patio is a modest job. A full cage over a pool, with a tall roof and a long run of beams, takes more hands and more time to bring down safely. A cage that’s already partly down after a storm is estimated the same way: tell us about it on a call. The minimum for any pickup is $95.
The short version
Pool Screen Enclosure Removal at a glance.
- What it is
- Taking down and hauling away aluminum pool screen enclosures — screens, beams, uprights, doors and kick plates — with the pool deck protected and swept.
- What’s included
- Screen panels pulled and rolled up
- Aluminum beams and uprights lowered, not dropped
- Doors, kick plates and hardware
- Nothing left in the pool or on the deck
- Estimate by phone, price in writing on site
- How pricing works
- Priced by the tier the enclosure fills, set by its size, its height and how far the pieces have to be carried. Describe the enclosure’s size and height on a call; we estimate it, then confirm the firm price in writing before the first screen comes out.
Also called: pool cage, screen enclosure, lanai screen, pool enclosure, screened pool cage, aluminum screen room.
Part of our Light Demolition service
Yes, we take down pool screen enclosures. Most of them are the same idea: an aluminum frame of uprights and long roof beams, screen stretched into each panel and held by a rubber spline, a screen door or two, and solid kick plates along the bottom. Salt air, sun and a few rough storms are hard on all of it. The screen tears and sags, the spline dries out, and sometimes a beam gets bent and the whole cage starts to look tired.
Aluminum is light. That’s the good news. The work is in the length and the count — dozens of long pieces, a lot of fasteners, and a pool sitting right in the middle of the job. So it comes down in a careful order: screens out of their splines and rolled up, the door off, then the beams and uprights unbolted and lowered rather than dropped.
The pool deck is the thing we protect most. Nothing goes in the water, and the screws, bits of spline and screen scraps get picked up off the deck and the grass.
What we haul
Specifically, what we take for pool screen enclosure removal.
- Aluminum pool cages and screen enclosures
- Torn, sagging or storm-damaged screen panels
- Bent or broken roof beams and uprights
- Screen doors, kick plates and corner pieces
- Screened patio and lanai enclosures
- Leftover spline, screen rolls and hardware
How we work
Taking Down a Pool Screen Enclosure Around Brunswick
We’ll call ahead when we’re on the way, and we look at the whole yard before anything comes down: where the long pieces can be laid out, how they get to the truck without crossing flower beds or catching sprinkler heads, and where the trailer can sit. Beams are carried, never dragged across the deck, and a side gate just means the pieces go out one at a time.
A short call about the size of the cage and how we reach it tells us most of what we need. If anything special is needed, we’ll sort it out with you when we quote.
Afterward, we prioritize donating clean, usable items to local Coastal Georgia charities and recycling metals whenever possible — and an enclosure is mostly aluminum, so the frame usually goes to metal recycling. The old screen leaves with the load, and the deck is swept before we go.
Out by the marsh in Beverly Shores, a pool cage takes the wind and the salt air full on, and the screens show it first. Up along Royal Oaks, the yards are bigger, and the question is usually how the long beams get from the back of the pool to the driveway without crossing the beds. Tell us how big the enclosure is and what it’s attached to, and we’ll plan the take-down and the carry for any backyard across Brunswick.
- Weight, typical job
- 300–1,200 lb
- Space, typical job
- about 300 cu ft
About 74% of the truck, which usually lands in the 3/4 truck tier ($400–$550).
- Single-item pickup
- $95+ minimum; one usually fills the 3/4 truck tier ($400–$550)
- Added to a bigger load
- Custom volume tier
Good to know
- Clear a path to it if that’s easy — the lifting is our job.
Typical figures, not a quote. Call for a free estimate; your firm, final price is confirmed in writing on site before anything is loaded. The minimum for any pickup is $95.
FREE ESTIMATES · LOCAL TEAM
Need pool screen enclosure removal in Brunswick or the Golden Isles? Give us a call.
You don’t have to have everything figured out before calling. Tell us what needs to go and we’ll talk through the details and pricing with you.
If the enclosure ties into the roof of the house or anything structural, mention it when you call and we’ll tell you plainly what it takes.
Questions
Frequently asked questions about pool screen enclosure removal.
Can you take down a whole pool screen enclosure at a Brunswick house?
A storm bent our Brunswick pool cage. Will you haul off what’s left?
Will anything end up in the pool?
We’re only re-screening. Can you take just the old screen?
Related items
Other things people pair with this haul.
Awning & Patio Cover Removal
Almost every awning and patio cover job runs in the same order.
Read morePool Equipment Removal
Most pool equipment jobs are a clear-the-pad haul, not a teardown.
Read moreHurricane Shutter Removal
Stacked panels are a straightforward carry: they come out of the garage or off the side of the house and onto the truck.
Read moreScrap Metal Removal
Scrap loading is the routine work — gloves on, gloves stay on.
Read moreBasketball Goal Removal
Portable hoops are the more common call, and the base is what makes them slow rather than hard.
Read moreBoat Removal
Some boats come out whole.
Read more
Common in
Where we haul pool screen enclosure removal most.
We haul pool screen enclosure removal regularly across the Golden Isles, especially around Brunswick, St. Simons Island, Kingsland, Jekyll Island, and Sea Island.
Serving Brunswick, the Golden Isles and Coastal Georgia.
From our Brunswick base, we handle pool screen enclosure removal across all five counties we serve: Glynn, McIntosh, Camden, Liberty and Wayne. Same-day pickup is often available around Brunswick and the islands. Call (912) 222-1677 for the next available opening.
FREE ESTIMATES · LOCAL CREW
Tell us what needs to go—we’ll handle the heavy lifting.
Whether it’s one heavy piece upstairs, a garage you can’t park in, or an entire property cleanout, our crew removes it right from where it sits. Call for a free, no-obligation estimate across Brunswick, the Golden Isles, and Coastal Georgia.
- Speak with our local team
- Upfront pricing before we lift a thing
- Open Mon–Sat 7:30am–10pm
- Sunday 9am–7pm
